Product Description:
Absolute Encoder, Electromagnetic Encoder, Encoder Series by Assun
are used for providing extreme precision feedback information of
motion to controllers and mostly used when there are specific high
orecision needs in the DC drive applications.
Product introduction:
AM-EN1611S113 SERIES :
1.Encoder type : absolute. power Vcc: 5V±5% Multiple circles / bits : NC . Highest clock rate: 10MHz.
2.Angle / bit : 16 . Operating Temperature : -40~125℃. Protocol : SSI
. Inertia : 0.015g.cm².
3.Number of channels : 3 . Output Current, each channel : 20mA(max). Differential signal : Yes. Weight : 6.5g
4.Suitable for shaft diameter : 2.0 / 3.0 / 4.0 . Suitable for
shaft length: 3.7~4.0.
5.Suitable for boss diameter : 6.45~6.5 . Suitable for boss
thickness : Max 1.0
6.Code wheel spacing : 0.7~1.0
Product Detail:
| Basic parameters | Specification | Suitable for motor size | Pin definition |
| Encoder type | absolute | Power Vcc | 5V±5% | Suitable for shaft diameter | 2.0 / 3.0 / 4.0 | 1. NC | 2. Vcc |
| Multiple circles/ bits | NC | Highest clock rate | 10MHz | Suitable for shaft length | 3.7~4.0 | 3. GND | 4 NC |
| Angle /bit | 16 | Operating Temperature | -40~125℃ | Suitable for boss diameter | 6.45~6.5 | 5. SCL+ | 6. SCL- |
| protocol | SSI | Inertia | 0.015g.cm² | Suitable for boss thickness | Max 1.0 | 7. NSL+ | 8. NSL- |
| Number of channels | 3 | Output Current,each channel | 20mA(max) | Code wheel spacing | 0.7~1.0 | 9. DO+ | 10. DO- |
| Differential signal | yes | Weight | 6.5g | Other fixed size | Drawing | | |
Product Combiniation Scheme :
Recommended Gearbox:
1.Planetary gearbox: AM-16GP. AM-28GP. AM-20GP. AM-32GP. AM-24GP
Recommended Motor :
2.Brushless Motor:
AM-BL16** . AM-BL20** . AM-BL/D24** . AM-BL/D28**
Remarks: Clients can choose gearbox and motor to match with this encoder.
Application:
Application of Assun Encoder in intelligent equipment. Robotic
brake. Z-axis brake. Servo motor static braking. General purpose
motor.etc.
Attention :
1. Non-professional personnel are strictly prohibited to operation.
2. Do not remove and change the electrical wire by yourself to
avoid causing damage to the encoder.
3.When installation, prevent static damage to the encoder.
Service idea :
We can search for qualified products according to the required
specifications (size, torque, revolutions, etc.) of gearbox, DC
motor and reducer proposed by customers. The products searched are
just one example of a rich product lineup, and there are many
products that have not been published. At the same time, we also
undertake special product design and OEM development. For relevant
matters, please contact the business department of our company.
